Open ADR Certified Products

by | Sep 19, 2020

The most advanced Automated Demand Response Device.

  • Save time and trips to to the job site with plug and play installation.
  • A rugged Industrial Linux platform (-40C to 70C Operating Temperature).
  • Goes anywhere from the Factory Floor to Industrial Plants, Hotels and Sports Venues, Steel Mills, Cold Storage and Water Plants.
VT-IPM2m 113

VT-IPM2M 113/213 Series ADR

Use for all DR Applications when more than 1 Relay Outputs are needed for Pending & Event (Moderate/High) Signals. Interface with Building Automation and Energy Management Systems using Modbus or BACnet. 

Optional 4-20mA outputs on the VT-IPM2M 213 ADR for configurable analog read out or direct control of energy consuming devices. 

  • Industrial platform -40C to 70C Operating Temp.
  • 12 DI, 8 AI & 4 DO
  • 4 High Speed counters for KYZ inputs
  • 2 Analog 4-20mA output (optional with model 213)
  • Modbus RTU/TCP
  • BACnet & DNP3 (optional)
  • Open ADR 2.0a & 2.0b certified
  • GRIDview enabled

more …

VI-IPM 135

VT-MIPM 135 Series ADR

Use for Simple & Special Signal DR Applications or when additional configurable Relay Outputs are needed. Interface with Building Automation and Energy Management Systems using Modbus or BACnet. 

Special Control logic can be provided for Fast Frequency Response or Current Limiting. Custom programming is available. 

  • Industrial platform -40C to 70C Operating Temp.
  • 12 DI, 6 AI & 8 DO
  • 4 High Speed counters for KYZ inputs
  • Modbus RTU/TCP
  • BACnet & DNP3 (optional)
  • Open ADR 2.0a & 2.0b certified
  • GRIDview enabled

more …

RAM 6021 CE

GL 6000 E Series ADR

Used for all Demand Response Applications that interface with a larger system such as a Building Automation System, local PLC, Commercial Air Conditioning or OEM systems.

GRIDlink E series is a world class industrial router which allows the user to create a sub-network of all devices and only 1 interface with the customer’s LAN. This way IT needs to assign only 1 static IP address or allow only 1 DHCP device on the network.

Modbus TCP, DNP3 or optional BACnet. 

  • Industrial platform -40C to 70C Operating Temp.
  • 5 Ethernet Ports – Router can create its own sub-network
  • 1 RS232 Serial Port
  • Modbus RTU/TCP & DNP3 Slave
  • BACnet  (optional)
  • Open ADR 2.0a & 2.0b certified
  • GRIDview enabled

 more …

The first Open ADR 2.0a/b Certified  Industrial Gateway/Router

  • A rugged Industrial Linux platform (-40C to 70C Operating Temperature).
  • Goes where networks do not exist or are restricted like Government Buildings or remote irrigation sites.
  • Automatic fail-over to cell on loss of LAN connection means GRIDlink CE will lower data plan cost.
RAM 6021 CE

GL 6000 CE Series ADR

Used for all Demand Response Applications that interface with a larger system such as a Building Automation System, local PLC, Commercial Air Conditioning or Cloud Automation.

GRIDlink CE is a world class industrial router which allows the user to create a sub-network of all devices and only 1 interface with the customer’s LAN. This way IT needs to assign only 1 static IP address or allow only 1 DHCP device on the network.

The cellular option permits the user to avoid the Local Network all together or can be configured with cell fail-over to save data costs.

Modbus TCP, DNP3 or BACnet. 

  • Industrial platform -40C to 70C Operating Temp.
  • Optional 4G LTE cellular option – configurable for cell fail-over on LAN failure
  • 1 or 5 Ethernet Ports – Router can create its own sub-network
  • 1 RS232 Serial Port
  • Modbus RTU/TCP & DNP3 Slave
  • BACnet  (optional)
  • Open ADR 2.0a & 2.0b certified
  • GRIDview enabled

 more …