Connect devices anywhere using an Industrial WiFi network.
Seamlessly connect devices within a large building or a large plant up to 5km reliably. The GRIDlink WiFi Client can connect to your existing secure 802.11 a,b,g,n or with the GRIDlink WiFi Access Point operate on a dedicated robust WiFi network. There is no limit to the number of clients a network may have.
GRIDlink uses an advanced Industrial POE radio with built in antenna. It is weatherproof and operates in extreme environments -30 to +75C.
Easy to install since it requires only a single CAT5E cable for connectivity and power. Simply strap it in place in line of sight of the Access Point and plug it into the POE injector provided. A second cable goes from the injector to the EtherTRAK Remote IO module. A carrier class outdoor Ethernet cable is provided in suitable lengths.
The EtherTRAK Remote IO module is equally as rugged and can shed loads on up to 8 separate devices and totalize KYZ Pulses on up to 8 meters. The totalized value of each meter is passed up to the GRIDlink ADR on each poll which can be every 0.5 to 3 seconds depending on the requirement.
PERFORMANCE SPECIFICATIONS
- 8 discrete inputs
- Nominal discrete input range 12/24 VDC/VAC
- 8 discrete outputs
- Max. output current per channel 1 Amp
- Filtered Mode ON/OFF delay 25 mS
- Filtered Mode count feature 10 Hz Maximum
- Fast Mode count feature 100 Hz Max (2 kHz on channel 1)
- Required supply voltage 10-30 VDC (0.75 watt typical)
- Operating temperature range -30 to 70° C
- Storage temperature range -40 to 85° C
- Humidity (non-condensing) 5 to 95%
MODEL NUMBER: ET-8D12-8DO2
OTHER VERSIONS AVAILABLE WITH ANALOG I/O FOR CT INPUTS