GRIDlink E-T24 Series
Title 24 Demand Response Made Simple for California Building Projects
The GRIDlink E-T24 OpenADR 2.0b gateway provides reliable demand response compliance for new construction and retrofits.
-
-
-
- Open ADR 2.0b certified virtual End Node with 1 Relay Output
- Add OpenADR to an existing system on a Layer 2 / Layer 3 network
- Expand Intelligence across wide areas through MQTT protocol
-
-
TRUSTED BY FACILITIES MANAGERS | RECOMMENDED BY ELECTRICIANS | 24/7 REMOTE MONITORING | DEPLOY IN ABOUT 60 MINUTES
ABOUT GRIDlink TECHNOLOGIES
OpenADR Solutions
FOR COMMERCIAL / INDUSTRIAL ENVIRONMENTS
GRIDlink Technologies builds hardware and network infrastructure engineered for the realities of the field — where conditions are harsh, margins are tight, and connectivity is non-negotiable. The E Series is our most capable OpenADR 2.0b certified VEN (Virtual End Node) yet, designed specifically for new construction and commercial renovation projects.
OpenADR solutions since 2010. Installations worldwide.
FOUR REASONS TEAMS
CHOOSE GRIDlink E-T24 & E2 Series
Rugged
Built on an industrial platform, the E-T24 is engineered for environments where consumer-grade hardware fails. DIN-rail mounted, wide-temperature rated, and designed for continuous operation in electrical panels and mechanical rooms — this is hardware specified for a 10+ year service life, not a product cycle.
Remote Monitoring / Test
GRIDview Cloud provides a persistent backend for every deployed unit — visible from your office, not just the job site. Before installation, GRIDview VTN lets you bench-test and validate each unit against project specs. On-site, it provides a live Demand Response demonstration environment for electrical inspectors and clients. Post-handover, remote diagnostics and OTA software updates mean most issues never require a truck roll.
Real-Time Connectivity
The E-T24 connects directly to a Utility’s Virtual Top Node (VTN) via OpenADR 2.0b — the standard required for Title 24 Demand Response compliance in California. MQTT protocol support extends intelligence across wide areas and multi-site deployments. Cellular and Ethernet options keep the unit online regardless of local network conditions, without requiring IT involvement or changes to your security policy.
Easy Deployment
24V DC power from the panel, a single Ethernet connection, relay contacts to lighting or HVAC controls — and most sites are testing within the hour. The T24 is designed to commission fast and hand over clean, with GRIDview providing the documentation trail that inspectors and clients expect.
THE PRODUCT
OpenADR 2.0b Certified — Fully certified virtual End Node. Plug into any Utility VTN with confidence — no waivers, no workarounds.
Industrial Controller — Built on Industrial hardware. Rated for continuous operation in harsh electrical environments, with a service life measured in decades, not product cycles.
GRIDview Cloud Included — Every unit is monitored, managed, and updatable from the GRIDview Cloud backend. Remote diagnostics, OTA firmware updates, and fleet visibility — all without a site visit.
GRIDview VTN — Test Before You Install — Simulate and verify full Demand Response participation in a controlled office environment before the unit ships to site. The only platform that lets you demonstrate OpenADR compliance to clients and inspectors on demand.
Deploy in About 60 Minutes — 24V DC, Ethernet, relay contacts to lighting or HVAC. No IT involvement required. Commissioned and connected to GRIDview Cloud and the Utility VTN in a single visit.
No Other Platform Does All Three — Industrial hardware + GRIDview Cloud management + GRIDview VTN testing. GRIDlink is the only solution that covers the full OpenADR lifecycle from bench to building.
WHAT ELECTRICIANS AND ENGINEERS SAY
TRUSTED ON THE JOB SITE
“Three sites, rolled out simultaneously. The T24 commissioned faster than anything we’ve used before — and when something needed attention, GRIDview had us troubleshooting from the office instead of the job site. Connected straight to the Utility’s VTN and GRIDview Cloud with no IT involvement. The cyber security is built in and it shows.”
MARCUS T.
Engineering Manager, Lighting Contractor
I’d budgeted a full day for the GRIDlink installation. In the end, it was 24V DC from the panel, an Ethernet connection to the local network, relay contacts wired to the lighting controls — and I was testing within the hour. I’ve never had a commissioning go that smoothly.”
URIEL C.
Electrical Contractor
“The complexity of our lighting product demands rigorous validation across multiple independent systems. GRIDview VTN provided an important tool to fully commission each unit at our manufacturing facility prior to shipment. Post-installation, the GRIDview Cloud enabled continuous remote monitoring and gave us a platform to demonstrate system performance directly to clients without requiring a site visit.”
PETER F.
Engineering Manager, Lighting Controls Manufacturer
“The GRIDlink connected to GRIDview Cloud and the Utility’s VTN without touching our network security policy. Our IT team didn’t need to get involved — and with industrial-grade hardware built for years of service, they won’t need to think about replacing it either.”
ARMANDO V.
Facilities Manager
GET IN TOUCH
Every application is different. Share a few details about your project and a GRIDlink specialist will be in touch within 1 business day to discuss the right solution for your site — including volume pricing for multi-site deployments.